Framing Systems

Some of the most common primary framing systems are shown below, asymmetrical framing system and multi span framing system with unequal width module are also possible, but may require more engineering time and possibly longer deliveries. For more information on framing system please contact engineering at Modern Prefab Systems Pvt. Ltd.

Primary Members
Primary members consists of columns, rafters, beams etc. These are fabricated from high strength HR Plates. Plates are cut to size using Hi Tech CNC and Oxy Cutting machines, which are installed in our factories. Built up sections are made from these plates in automatic beam welding line by submerged Arc welding (SAW).

Secondary Members
Secondary Members used in PEB include purlines, side runners, eave struts, fascia channels, door, window, rafters stays, bracings etc.

Purlines and girts are cold rolled formed light gage Z sections varying in depth from 180 to 300 mm and in thickness from 1.5 mm to 2.5 mm as per design requirements.

All primary connection fasteners will be with high strength bolts conforming to the physical specification to the ASTM A325 or equalent.

The fasteners for the cladding / roofing includes GI self tapping screws/ GI Self drilling screws in varying sizes to suit the roofing / cladding requirements. These accompanied with neoprene or EPDM washers to obtain long services and maximum weather resistance.

Clear Span

Multi-Span 1

Single Slope

Multi-Span 2

Multi Gable

Multi-Span 3

 

 

Roofing & Cladding

Modern Roofing and Wall Cladding Systems are specifically designed to cater all kinds of industrial and commercial roofing and cladding needs. The high performance and quality offered by these systems ensures extra strength, better over lap, weather tightness, corrosion resistance, low maintenance cost and good aesthetics.

Modern roofing and cladding systems can be fixed over the purlins or runners using self drilling fasteners, J hooks etc. including neoprene / EPDM / Bitumen washers on the sheet.

These sheets are produced on state of the art fully automated machines and match all international standards and specifications.

TECHNICAL PARAMETERS OF BASE MATERIALS

GALVALUME STEEL

Galvalume steel is a zinc aluminum coated steel offering high corrosion resistance. This alloy coating com comprises of 55% aluminum 43% zinc and 1.5% silicon. This Coating offers a superior barrio protection against varied atmospheric conditions. The coating class is AZ-150 as per AS : 1397, which means 150gms/m2 minimum coating mass total of both sides.

Galvalume sheets are available in tensile strengths of 300, 345 & 550 MPa

GALVANIZED STEEL
Galvanized steel comprises of galvanized zinc coating over mild steel of minimum coating mass 120 gms / m2
as per IS 277 in tensile strength of min. 240 MPa.

STANDARD CONFORMANCE

AS : 2728, AS 1397
IS : 14246, IS : 513, IS : 277

PAINTING

Color coating oven baked painted system of following types are available.

1) Galvalume Steel : Super Polyester XRW, Silicon modified polyester or fluoropolymer 20 microns ( exposed side ) & neutral alkyd back coat of 5 microns over primer coat of 5 microns on both side.

2) Galvanized Steel : Polyester top coat of 20 microns over primer of 5 micron ( exposed side ) & alkyd back coat of 5 microns over primer coat of 5 microns.

.
.

Disclaimer